Panel Dimensions: Single Bottom Drawer; Panel Dimensions Column Models - Fulgor Milano F7IRC36O1 Notice D'installation

Masquer les pouces Voir aussi pour F7IRC36O1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. PANELS MOUNTING
EN
5.6 Panels dimensions: single bottom-drawer
Panels can have thickness ranging between 18 mm (3/4") and 28 mm (1-1/8").
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum weight of 11kg
(25 lbs). Exceeding these weights could void your warranty for any service issues which can be attributed to
overweight panels.
The hinging mechanism on Fulgor Milano appliances is considered to be `Zero-clearance`. The door and drawer
widths specified below assume the minimum cutout width is being used and a 3.5mm (1/8") reveal is desired
around the panels. Adjust your panel dimensions accordingly to your own design criteria considering your
cutout width and your reveal. Minimum reveal / gap should not be less than 1.5mm (1/16").
MODEL
DOOR/DRAWER WIDTH A
DOOR CUTOUT WIDTH B
36"
908 (35 3/4")
627 (24 3/4")
30"
756 (29 3/4")
477 (18 3/4")
24"
604 (23 3/4")
327 (12 7/8")
3 ( ⁄ ")
Example:
84" cutout height
36" cutout width
4" toe kick height
1/8" gap desired all around
26
min 200 (7 ⁄ ")
135
135
(5 ⁄ ")
(5 ⁄ ")
115 (4 ½")
A
B
Door panel:
Width: 35-3/4"
Height: 54-3/4"
Drawer panel:
Width: 35-3/4"
Height: 84"-1/8"-54-3/4"-1/8"-4"=25"
If you want a 6" toe kick height then your bottom drawer panel
height would be 23"

5.7 Panel dimensions column models

Panels with width ranging between 19 mm (3/4") and 28 mm (1 1/8").
Door panels with weight max of 34 kg (75 lb)
Exceeding these weights could void your warranty for any service issues which can be attributed to
overweight panels.
The hinging mechanism on Fulgor Milano appliances is considered to be `Zero-clearance`. The door and
drawer widths specified below assume the minimum cutout width is being used and a 3.5mm (1/8") reveal
is desired around the panels. Adjust your panel dimensions accordingly to your own design criteria
considering your cutout width and your reveal. Minimum reveal / gap should not be less than 1.5mm (1/16").
MODEL
DOOR WIDTH A
DOOR GLASS WINDOW WIDTH B
36"
908 (35 3/4")
-
30"
756 (29 3/4")
-
24"
604 (23 3/4")
327 (12 7/8")
For fridge and freezer columns
139
139
(5 ½")
(5 ½")
A
B
For wine columns
EN
27

Publicité

Table des Matières
loading

Table des Matières