Internal Layout; Internal Layout (Positioning, Adjustment, Removal); Maximum Cabinet Depth Over "Integrated" Refrigerator With Single Door Panel - Fulgor Milano F7PBM36S1 - R Mode D'emploi

EN

6. INTERNAL LAYOUT

6.1 Internal Layout (positioning, adjust-
ment, removal)
Fresh Drawer
Fixed to the slide guides with two thumbscrews.
> to remove the drawer, unscrew the thumbscrews
and remove the drawer.
Fresh Zone Drawer
The upper Fresh Zone can be removed using the
same method used for the Fridge drawer
> to remove the inner Fresh Zone drawer unscrew
the thumbscrews.
When replacing the drawers, make certain the
back of the drawers engage under the clips on the
slide guides.
Ice Tray
Located in the upper drawer of the freezer com-
partment
> after removal, make sure to reposition it correctly.
Warning
Do not place hands or fingers near the Ice-
maker when in function.
Door Shelves
The door shelves can be easily removed for cleaning
> Hold the door shelf at the sides and push it upwards
to release it from its seat, then pull it outwards.
> Reverse the procedure to reinstall.
16
6.2 Maximum cabinet depth over "In-
tegrated" refrigerator with single door
panel
It is possible that the design of the kitchen and, in
particular, of the niche where the "Integrated" refrig-
erator is going to be fitted includes a cabinet right
above the refrigerator itself that must be closed with
the same panel mounted on the Integrated refrigera-
tor door."
In this case, the total depth of the cabinet without
the door (above the refrigerator) must not exceed
the total depth of the refrigerator itself. [1]
This will allow the panel attached to the refrigerator
door to open correctly without interference during its
rotation up to 105°.