Wood's M10G Manuel De L'utilisateur page 9

English
DRAINING THE COLLECTED WATER
When the drainage tank is full, the tank full indicator light will turn on, the operation will stop automatically and the
buzzer will beep 15 times to alert the user, that the water need to be emptied from the drainage tank.
Emptying the Drainage Tank
1.Lightly press on the sides of the tank with both hands and pull the tank out gently.
2.Discard the collected water
NOTE!
1. Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water level
correctly without the float and water may leak from the water tank.
2. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use detergent, scouring pads, chemically
treated dust cloths, gasoline, benzene, thinner, or other solvents, as these can scratch and damage the tank and cau-
se water leakage
3. When replacing the drainage tank, press the tank firmly into place with both hands. If the tank is not positioned pro-
perly, the "TANK FULL" sensor will be activated, and the dehumidifier will not operate.
9