To Insert And Remove The Batteries - Petsafe Guardian Anti-Bark Collar Manuel D'utilisation

To Insert and Remove the Batteries

1. Turn the battery door counter-
clockwise using a coin as shown.
2. Install two (2), 3-volt batteries
positive (+) side out, negative
(-) side pointed toward inside of
battery unit. Place the lower 3-volt
battery under the positive battery
contact. Insert the upper 3-volt
battery against the positive battery
contact.
3. Replace the battery door using a
coin as shown. Turn the battery
door clockwise.
Replacement batteries (3-volt,
RFA-35-11) can be found at many
retailers. Contact the Customer Care
Center at 1-800-732-2677 or visit our
website at www.guardianpet.net to
locate a retailer near you.
www.guardianpet.net 11