Maintenance and care
This regulating screw can only be adjusted with a
special socket wrench not included in the scope
of delivery.
NOTE
The carburettor must only be adjusted by
an authorised service workshop.
8.5
Checking/tightening the appliance
screws (24)
The screws of the appliance can loosen due to
the vibrations of the motor. Tools are available in
the scope of delivery for checking/tightening the
screws of the appliance:
■
®
Torx
angled screwdriver (24/1)
■
Screwdriver handle with plug insert for slotted
and cross-head screws (24/2)
■
Spark plug spanner with screwdriver (24/3)
1. Insert the matching tool in the screw.
2. Turn the screw clockwise with a short jerk.
NOTE
Do not turn the regulating screws on the
carburettor. Therefore no socket wrench
has been supplied for these regulating
screws.
2500043_a
Autogoods "130"
43