Control Panel; Accessories - Hilti PD-E Mode D'emploi

2.9 Control panel

"Measure" button
Left arrow button / right arrow button
The "Clear" button has various func-
tions depending on the operating sta-
tus:
"Menu" button
On/off button
2.10 The items supplied
1 PD‑E laser range meter
2 Batteries
1 Soft pouch
1 Operating instructions
1 Manufacturer's certificate
1 Hand strap
1 Brochure for users

3 Accessories

Designation
Target plate
1
Target plate 2
Target plate 3
Measuring extension
Laser visibility glasses 4
1 with reflective coating (4.7x5.1 in)
2 white (4.7x5.1 in)
3 with reflective coating (8.3x11.7 in)
4 For improved laser beam visibility under difficult lighting conditions.
All manuals and user guides at all-guides.com
Quick start (when the tool is switched off, press the button briefly to
switch it on).
Begins distance measurement.
Activates the laser beam.
Activates continuous measuring mode (long press, approx. 2 sec.).
Stops continuous measuring mode.
Confirms the selected function or setting.
Used to navigate between functions and to make settings.
Stops continuous measuring (tracking).
Deletes the last measurement.
Goes one step back (short press).
Deletes all displayed measurements (long press).
Ends the function if no measurements have been taken.
Opens the main menu.
Switches the tool on or off.
Short designation
PDA 50
PDA 51
PDA 52
PDA 72
PUA 60
en
3