Pairing BLUETOOTH
1. Set the BLUETOOTH
mode;
2. Turn on the unit. Turn the Bluetooth control button to "ON" position.
3. The turntable is ready for connection and the BLUETOOTH
4. When the pairing is successfully performed, the turntable BLUETOOTH
is fixed.
Note: This unit will connect to the closest BLUETOOTH
minutes no BLUETOOTH
become inactive and the LED will turn red. To activate the BLUETOOTH
®
BLUETOOTH
button und turn on again.
The current instruction manual can be downloaded from
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Duplication only with the permission of Woerlein GmbH
BLUETOOTH
®
to Stereo System
®
receiver device (BLUETOOTH
®
speaker can be found to pair with, the BLUETOOTH
®
TRANSMITTER
®
- headphone or speaker to pairing
®
indicator LED light is flashing.
®
speaker that is near it. If after 3
www.soundmaster.de
www.soundmaster.de
5
PL790 / English Instruction Manual
®
indicator LED light
®
transmitter will
®
function, turn off the