GYS TITANIUM 400 AC/DC Mode D'emploi page 43

Import Config. : Importing a USB key one or more «USER» configurations and its JOBs.
Export Config : export the current «USER» configuration and its JOBs to a USB stick.
JOB import: import of JOBs present under the USB directory of a USB key.
JOB export : export the JOBs to a USB key according to the processes in a USB\Portability directory.
TRACEABILITY
This welding management interface allows you to trace/record all the steps of the welding operation, bead by bead, during industrial manufactu-
ring.
This qualitative approach ensures a post-production welding quality that allows the analysis, evaluation, reporting and documentation of the
recorded welding parameters. This feature complies with EN 3834.
CThis mode allows the recording of weld seams and the recovery of this data via an export to a USB stick. These data will be processed in.CSV
format.
When «Start» is started in this mode, a working session is created and all welding will be recorded under it, named and time-stamped.
The «Explore» function allows you to access the list of created work sessions, sort them and also delete them. The picto allows you to see the
details of each session with the following information: sampling frequency, number of beads recorded, total welding time, welding energy supplied,
configuration of each bead (process, time stamp, welding time and welding U-I).
The recovery of this information is done by exporting the data to a USB key.
ERROR MESSAGE, ANOMALIES, CAUSES AND SOLUTIONS
This device integrates a default management system. In the event of a failure, the following error messages may appear:
ERROR CODE / SYMPTOMS
OVERVOLTAGE FAULT
Check the electrical installation
UNDERVOLTAGE FAULT
Check the electrical installation
PHASE FAULT
Check the electrical installation
GENERATOR
Thermal protection
FAN
Fan failure
COOLING UNIT FAILURE
Cooling unit not detected
TITANIUM 400 AC/DC
CAUSES
Mains voltage out of tolerance.
Mains voltage out of tolerance.
The installation has a missing or unbalanced
phase
- Exceeding the duty cycle.
- Blocked air inlets.
The fan is not running at the right speed.
The cooling unit is not detected.
SOLUTIONS
Have your electrical installation checked by an
authorised person. The voltage between the
3 phases must be between 340 Veff and 460
Veff.
- Wait for the indicator to turn off before resu-
ming welding.
- Observe the operating factor and ensure
good ventilation.
- The use of the optional dust filter (ref.
046580) reduces the duty cycle of the
machine.
Please disconnect the machine, check and
restart.
Check the connection between the cooling unit
and the appliance.
EN
43