Chauvet DJ GigBAR MOVE+ILS Mode D'emploi page 32

Operation
• The individual fixture icon buttons can also be used to turn on and off the selected
functions.
• Any setting on the RF remote will be saved until the system is rebooted. The system will
revert to Auto Mode after reboot.
GigBAR MOVE + ILS User Manual Rev. 7
Spots Program
To select a program for the Spots using an RF remote:
1. Press the Spot icon button on the RF remote.
2. Press <MOVE MENT> on the RF remote.
3. Press <+> or <–> to change the movement program.
Spots XY Speed
To adjust the pan/tilt speed of the Spots using an RF remote:
1. Press the Spot icon button on the RF remote.
2. Press <SPEED> on the RF remote.
3. Press <+> or <–> to increase or decrease the pan/tilt speed.
Spots Color
To select a color for the Spots using an RF remote:
1. Press the Spot icon button on the RF remote.
2. Press <COLOR> on the RF remote.
3. Press <+> or <–> to scroll through the color wheel.
Spots Gobo
To select a gobo for the Spots using an RF remote:
1. Press Spot icon button on the RF remote.
2. Press <GOBO> on the RF remote.
3. Press <+> or <–> to scroll through the gobo wheel.
Par Program
To select a program for the Pars using an RF remote:
1. Press the Par icon button on the RF remote.
2. Press <COLOR> on the RF remote.
3. Press <+> or <–> to scroll through the color programs.
Par Color
To select a static color for the Pars using an RF remote:
1. Press the Par icon button on the RF remote.
2. Press <STATIC> on the RF remote.
3. Press <+> or <–> to scroll through the static colors.
Derby Program
To select a program for the Derby using an RF remote:
1. Press the Derby icon button on the RF remote.
2. Press <COLOR> on the RF remote.
3. Press <+> or <–> to scroll through the colors.
Derby Speed
To adjust the rotation speed of the Derby using an RF remote:
1. Press the Derby icon button on the RF remote.
2. Press <SPEED> on the RF remote.
3. Press <+> or <–> to increase or decrease rotation speed.
Laser
To turn on and off the Laser using an RF remote:
1. Press the Laser icon button on the RF remote.
Strobe Program
To select a program for the Strobe using an RF remote:
1. Press the Strobe icon button on the RF remote.
2. Press the <EFFECT> button to select a specific effect.
3. Press <+> or <–> to scroll through the effects.
37