Chauvet DJ GigBAR MOVE+ILS Mode D'emploi page 20

Operation
Strobe
To set the strobe on the GigBAR MOVE + ILS, follow the instructions below:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until AUTO or SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Strobe.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to set the strobe from 0–20.
7. Press <ENTER>.
Program Time
To set the program time on the GigBAR MOVE + ILS, do the following:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until AUTO or SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Program Time.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to set the timer from 0–255 (seconds).
7. Press <ENTER>.
Pars Color
To set what color the pars will display when set to auto program, follow the instructions below:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until AUTO or SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pars Color.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select among Tri (use RGB), Quad (use RGBA), or Hex (use all colors).
7. Press <ENTER>.
Spot Speed
To manually control the moving head speed in sound-active mode on the GigBAR MOVE + ILS, do the
following:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Spot Speed.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to set the speed from 0 (activates sound-active moving heads) or 1–99
(adjusts the speed of the moving head, from slow to fast).
7. Press <ENTER>.
Sound Lost
To set what the entire bar will do when sound is lost, follow the instructions below:
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until SOUND is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound Lost.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to choose from Slow (the par, derby, laser, and strobe will stop on the last
setting, whereas the moving heads and color/gobo will stop on the last setting, and the movement
will run slowly), Freeze (the entire bar will freeze on the last setting), or Blackout (the entire bar
will blackout).
7. Press <ENTER>.
GigBAR MOVE + ILS User Manual Rev. 7 25