Kessel EasyClean free Auto Mix&Pump Instructions D'installation Et D'utilisation page 44

8 Overview of configuration menu
AutoMix and Pump menu texts
0 System info
1 Information
2 Maintenance
Access code: 1000
3 Settings
44 / 148
1.1 Hours of operation
1.2 Log book
1.3 Control type
1.4 Maintenance date
1.5 Current measured values
1.6 Parameter
1.7 Measuring data
1.8 Emptying
2.1 Manual operation
2.2 Automatic operation
2.3 SDS
2.4 Maintenance date
2.5 Clearance RemoteControl
3.1 Parameter
1.1.1 Total running time
1.1.2 Run time pump
1.1.3 Pump starts
1.1.4 Power outage
1.4.1 Last separator maintenance
1.4.2 Next separator maintenance
1.5.1 Rotary field
1.6.1 Cleaning+shredding
1.6.2 Valve part fill
1.6.3 Valve fill
1.6.4 On delay
1.6.5 Legionella flushing interval
1.6.6 Legionella flushing, cold
1.6.7 Legionella flushing, hot
1.6.30 Access remote control
1.7.1 Last layer thickness and tem-
perature determined
1.7.2 Previously determined layer
thickness and temp
1.7.3 Previously determined layer
thickness and temp
1.7.4 ...
1.8.1 Last emptying
2.1.1 Cleaning+shredding
2.1.2 Valve part fill
2.1.3 Valve fill
2.3.1 Test pump 1
2.3.2 Test valve part fill
2.3.3 Test valve fill
2.3.4 Test pump 2
2.3.1 Last separator maintenance
2.3.2 Next separator maintenance
2.5.1 Clearance duration
2.5.2 Deactivate
3.1.1 Disposal
3.1.2 Valve part fill
3.1.3 Valve fill
3.1.4 On delay
3.1.5 Legionella flushing, cold
3.1.6 Legionella flushing, cold
3.1.7 Legionella flushing, hot
016-190_01