Publicité
Les langues disponibles
Les langues disponibles
2.3
Intended use
The product is a system for separating grease out of domes-
tic or commercial wastewater per DIN EN 1825. Greases
are substances of vegetable origin and/or animal origin with
a density of less than 0.95 g/cm3, which are partially or
completely insoluble in water or saponifiable. Disposal and
maintenance cycles as well as requirements concerning the
installation site must be complied with for proper operation.
All:
modifications or attachments
use of non-genuine spare parts
repairs carried out by companies or persons not autho-
rised by the manufacturer
without the express and written approval of the manufacturer
can lead to a loss of warranty.
2.4
Product description
Conversion of the system for a higher degree of automation of the disposal process is possible with specific retrofit kits.
This system has a control unit with display through which pump and solenoid valve control runs as a fully automatic disposal
program. Manual intervention or the disposal vehicle pump are not required.
Pos. no.
Component
(1)
Shredder-mix pump
(2)
2-way valve and actuator for flushing and
disposal pipe
(3)
Inlet
(4)
Control unit with display
(5)
Service access cover (inlet side)
(6)
Solenoid valves for hot and cold water
(7)
Refill inlet
(8)
Direct disposal pipe
(9)
Service access cover (outlet side)
(10)
Outlet
(11)
Shut-off valve for pump removal
(12)
Lifting points for forklift truck (both sides)
28 / 148
016-190_01
Publicité
