Kessel EasyClean free Auto Mix&Pump Instructions D'installation Et D'utilisation page 39

6 Disposal
Carry out disposal
Partial emptying
Connect the suction hose of the disposal vehicle to the
Storz-B coupling.
Press the START/STOP button to open the | Start auto-
matic operation | menu, then confirm with OK:
✓ The program step | Partly empty | starts automatically.
When this has finished, the following program step, see
below, is executed automatically.
Mix
✓ The program step | Mix | is executed automatically.
Wait until the separator content has been homogenised
sufficiently. How long this takes depends on the nominal
size. The times in the table shown below can be taken as
reference values.
Pump off
The program step | Empty | is executed.
Nominal size of Duration of the mixing process (in
the separator seconds)
NS 2 140
NS 4 225
NS 7 345
NS 10 450
016-190_01 39 / 148