Stanley AV 20 Mode D'emploi page 7

O R I G I N A L I N S T R U C T I O N
2.2 TOOL DIMENSIONS
65
254
Dimensions in mm.
2.3 PLACING CAPABILITY
Refer to the table below for the list of applicable rivets and associated nose equipment.
Refer to the datasheets listed in the table for the relevant nose assembly instructions.
Rivet Type
Type
Avbolt®
Avdelok® XT
Neobolt®
Refer to the illustration on page 7 for the identification of the nose assembly dimensions 'A' and 'B' .
The safety instructions must be followed at all times.
2.4 PACKAGE CONTENTS
2
• 1 x AV®20 Hydro-Electric power tool 73482-02000.
• 1 x Printed Instruction manual – region dependent.
The tool is fitted with a 0.6m hose set and control cable. Additional Hydraulic hose and cable extension lengths are available
to order separately as required. Refer to the table below for the available hose assembly lengths and associated part
numbers.
Part Number
07008-00448
07008-00449
07008-00450
47
B
Size Part Number
1/2" 73433-03100
1/2" 73433-03200
12mm 73482-03800
1/2" XT 73482-03700
3
Hydraulic Hose Assembly
A
Nose Assembly
Dim. 'A' Dim. 'B'
108 mm
107 mm
105 mm
96 mm
4 5
160.5
Nose Assembly Datasheet
Part Number
43 mm 07900-00905
43 mm 07900-00919
43 mm 07900-01072
43 mm 07900-01072
6
Hose Length
5 Metre
10 Metre
15 Metre
E N G L I S H
7
7