Jacuzzi COMFORT PURE AIR Bath Serie Installation Et Fonctionnement page 10

Blower
Electrical outlet must be mounted 4˝ (101mm)
above the floor line, or in accordance with local
building and electrical codes.
- The blower requires a dedicated 120 VAC, 15AMP,
GFCI protected circuit. The electrical outlet is not
supplied.
If the GFCI unit indicate a malfunction, per manufacturer's instructions, turn OFF power and do not use the
bathtub until the source of the problem has been identified and corrected.
Reference Illustrations
These illustrations are for reference only, as the unit comes fully assembled.
Risk of electric shock. Before servicing the unit, disconnect all power supply cables to all 120VAC services.
J2 Control Panel Schematic Diagram
CANADIAN MODELS ONLY:
The components must be hardwired in the J-Boxes (supplied) that are located on the unit.
1 - 120VAC, 15AMP dedicated GFCI protected circuit
Page 10
(101mm)
120VAC 15A GFCI
CONTROL PANEL
www.jacuzzi.com
Comfort Pure Air™ Bath
4˝
Figure 3
AUX
Figure 4
Installation and Operation
BLOWER