Vibration And Noise; Ec Declaration Of Conformity; Two Year Warranty - Stanley SP137 Mode D'emploi

ENGLISH (
Original Instructions)
Level of sound pressure according to EN60745
Sound pressure (L )
pA
Sound pressure uncertainty (K
Sound power (L )
WA
Sound power uncertainty (K
Vibration emission value ah:
(ah) =
Uncertainty (K) =

VIBRATION AND NOISE

The declared vibration and noise emission values stated in
the technical data and the declaration of conformity have
been measured in accordance with a standard test method
provided by EN 62841 and may be used for comparing one
tool with another. The declared vibration and noise emission
value may also be used in a preliminary assessment of
exposure.
WARNING! The vibration and noise emission
value during actual use of the power tool can
differ from the declared value depending on the
ways in which the tool is used. The vibration and
noise level may increase above the level stated.
When assessing vibration and noise exposure to determine
safety measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation
of vibration and noise exposure should consider, the actual
conditions of use and the way the tool is used, including
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
10
dB(A) 86.6
) dB(A) 3
pA
dB(A) 97.6
) dB(A) 3
WA
m/s 4.4
2
m/s 1.5
2

EC declaration of conformity

MACHINERY DIRECTIVE
SP137 - Polisher
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC, EN
60745-1:2009 + A11:2010, EN 60745-2-3:2011+ A2:2013 +
A11:2014 + A12:2014 + A13:2015.
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back of
the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
STANLEY , Europe, Egide Walschaertsstraat14-18,

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
• The product has not been misused and has been used
in accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all
original components;
• The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual. A
list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com
R.Laverick
Engineering Manager
2800 Mechelen, Belgium
06.2018