CASO DESIGN Cafe Crema Touch Mode D'emploi Original page 65

15.2 Save the hot water quantity
Press the once, when hot water is rinsed then press again and leave your finger
on the button until the desired amount of water is dispesend. Release the button. The
device will beep twice. The quantity is saved.
Minimum quantity: 25 ml, maximum quantity: 250 ml
15.3 Milk foam function
Complete the preparations. Press
then the device beeps and the milk foam is dispensed.
► You can stop the flow by pressing the button once more.
► Use only milk, sojadrink or milk types suitable for the preparation of milk foam. Never
froth cocoa or milk with cocoa powder, as this can block the milk spout and
components and the dvice could be damaged.
► The milk foam consistency varies depending on the temperature, type of milk or fat
content.
► Test different types of milk and temperatures to find the best result for you.
► Always put the milk back in the refrigerator after use.
► The cappuccino function and the latte macciato function also use the milk foam
function. After a function with milk foam, use the rinsing function for the spout:
► Press
and
rinsed.
Warning: Risk of burns
► Steam escapes from the device during milk foam preparation.
► Keep distance from the device so that you will not have any contact with the hot steam
or splashes of milk.
15.4 Adjust the amount of milk foam
You can adjust the amount of milk foam. To do this, press
foam runs through, then press button again and keep your finger on the button until the
desired amout of milk foam has been dispensed. Release the button. The device will beep
twice. The quantity of milk foam is saved.
Maximum quantity: 250 ml
Please note
at the same time until the device beeps twice. The spout is
to generate the milk foam. It takes a moment
once and when milk
65