Seiko 8B92 Manuel D'instructions page 26

After the procedures are
5
completed, leave the watch for
20 seconds.
The preliminary position adjustment
mode is automatically terminated and
the second hand starts moving.
* I n p r o c e d u r e s 1 t o 5, w h e n n o
operation is conducted after the
date numeral and second hand stop,
and the watch has no movement of
the date or the second hand for 20
seconds or longer, it automatically
displays the time again. When it is in
the middle of operation, reattempt the
operation from procedure 1.
50
8B92̲E̲42-66.indd 50-51
Confirm whether the time and date
are correct af ter the watch resumes
displaying time.
In the case that the time and date are
not correct, adjust the time and date.
■ Setting the Preliminary Position of the Stopwatch 1/5-Second and Minute Hands
The preliminary position of the stopwatch 1/5-second hand is the 0-second position,
and that of the minute hand is the 0-minute position.
By setting the preliminary position, the correct measured result is displayed.
When pulling the crown to the
1
second click, the second hand stops
at the 0-second position.
0-second position
0 1
* The date and stopwatch hands also stop.
* If procedure 1 is conducted, the watch
gains or loses time.
Set the time in procedure 6 (set
the time by receiving a radio
signal).
2
2016/04/27 15:55
51