Seiko 8B92 Manuel D'instructions page 25

■
Setting the Preliminary Position of the Date / Hour and Minute Hands
The preliminary position of the date is "1" (1st).
The preliminary position of the hour and minute hands is "0:00 AM."
Press and hold Button A and Button
1
B simultaneously until the second
hand stops at the 30-second position
(for 3 seconds).
The watch enters the mode to adjust the
preliminary position of the date. And then the
date numeral starts moving and stops at the
preliminary position.
B
30-second position
A
During movement of the date numeral, the
*
buttons cannot be operated.
48
8B92̲E̲42-66.indd 48-49
2
Press Button A to set the date to "1."
Adjust the date so that "1" will locate at
the center of the date window.
* When "1" is displayed in the date
window, go to procedure 3.
When Button A is kept pressed
for 2 seconds or longer, the date
Continuous
starts to move. Press Button A
Advance
again to stop.
Each pressing of Button A slightly
Fine
Adjustment advances the date.
A
Press and hold Button B until
3
the second hand stops at
the 0-second position (for 3
seconds).
The watch enters the mode to adjust
the preliminary position of the hour and
minute hands.
* When the correct time is displayed, go
to procedure 5.
B
0-second position
Press Button A once
4
and release it
The minute and hour hands move to stop
at "0:00 AM."
A
49
2016/04/27 15:55