Seiko 8B92 Manuel D'instructions page 15

● How to use the stopwatch
<STANDARD MEASUREMENT>
C C D
START STOP RESET
<ACCUMULATED ELAPSED TIME MEASUREMENT>
C C C
START STOP RESTART
* Restart and stop of the stopwatch can be repeated by pressing button C.
<SPLIT TIME MEASUREMENT>
C D D
START SPLIT SPLIT
RELEASE
* Measurement and release of split time can be repeated by pressing button D.
* If the time measured reaches 6 hours while the split time is being displayed, the stopwatch
automatically stops counting and releases the split time display, showing "00" 00."
<MEASUREMENT OF TWO COMPETITORS>
C D
START FINISH TIME OF 2ND COMPETITOR
1ST COMPETITOR FINISHES
28
8B92̲E̲1̲37.indd 28-29
C D
STOP RESET RESET
C D
STOP RESET RESET
C D D
FINISH TIME OF RESET
2ND COMPETITOR
● How to reset the stopwatch
While the STOPWATCH hands are moving
1. Press Button C to stop the stopwatch.
2. Press Button D to reset the stopwatch.
Stopwatch 1/5 second hand
While the STOPWATCH hands are stopped
[When the stopwatch is stopped]
1. Press Button D to reset the stopwatch.
[When the split time measurement is displayed
C
while the stopwatch is measuring.]
1. Press Button D to release the split time
display and return to the normal display.
2. Press Button C to stop the stopwatch.
3. Press Button D to reset the stopwatch.
[When the split time measurement is displayed
D
and the stopwatch is stopped]
1. Press Button D to release the split time
display.
2. Press Button D to reset the stopwatch.
Stopwatch minute hand
29
2016/05/06 13:55