EUROM E-CONVECT WIFI Manuel D'utilisation page 35

Safety precautions
Safety and remote operation
Your Eurom heater can be easily operated using your smartphone, via the same WLAN,
via a different WLAN, or via a 3G or 4G mobile network. This makes it possible to
operate your heater remotely, without your direct supervision.
Beware that even when operating the heater remotely, all safety precautions stated in
the user manual supplied must be observed. Read and understand these safety
precautions and make sure that all safety precautions are taken also with remote
operation.
Safety and setting the timer
The Eurom Smart App has two timer functions. A so-called 'countdown timer' to switch
the heater off automatically (as with the manual operation) and a 'Smart Timer' with
which you can create a schedule yourself with days and times on which the heater is to
automatically switch itself on and off. Any timer data entered into the Eurom Smart App
will be stored in the heater. This means that, once you have entered the timer data and
the heater loses the connection with the Wi-Fi modem, the heater will still be able to
switch itself on and off on your specified times. Storing the timer data in the heater is a
safety precaution. Your set on and off times schedule will also work without a Wi-Fi
connection. So the heater will not unexpectedly continue heating up if the Wi-Fi
connection (temporarily) fails.
The Smart timer data will be stored, even if the heater is switched off or the plug is
removed from the socket. The set Smart timer data can only be checked via the App
and also only be removed via the App. Bear this in mind when entering the data into the
Smart Timer. The Smart Timer data is not visible on the heater. Regularly check in the
App whether the entered Smart Timer data are still correct.
The set data for the so-called Countdown timer with which the heater can be switched
off, will not be stored when the heater is switched off. However the heater is switched
off: with the ON/OFF button, the main switch or the plug, the Countdown timer data will
be deleted.
You can consult an elaborate Eurom Smart App user manual with the QR code below:
or on the website: http://www.eurom.nl/nl/manuals
35