Publicité
Les langues disponibles
Les langues disponibles
Description, Composition and Installation
1 - Heat panel
2 - Control panel
Control panel:
A. Main switch & pilot light
B. Temperature sensor
C. Display
D. Up/down key
E. ON/OFF switch
F. Wifi button M
G. Blue wifi light
H. Red timer light
Remove all packaging material and keep out of reach of children.
After removing packaging, check the appliance for damage or other signs that could
indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but
contact your vendor for inspection or replacement.
This heater has been designed to hang securely from the wall.
Do not use it until it has been properly installed, as described in these
instructions for use and never, for example, in a standing position or when
3 - Suspension bracket (2x)
4 - Spacer bracket
What is unique about the E-convect, is that it can be painted.
You can paint the E-convect in any color you wish, with any
water resistant paint. Do not paint the box with the switch
and remove the plug from the socket before you start
painting. Allow the panel to dry before using it again!
leaning against something!
17
Publicité
