Ecoflam Multiflam 1500.1 Mode D'emploi page 34

420010310000 Multiflam 1500.1 - 1800.1 PR/PR
EN
The burner must be supplied with oil heaving a min. temperature at the pump ( 50° C ).
TYPE OF INSTALLATION
Drawing for fluid fuel oil up to 50°E at 50°C
Hot water
Drawing for heavy fuel oil up to 50°E at 50°C
Hot
water
section
oil pipe
heating cable
Return
hot water pipe
oil pipe
insulation
hot water pipe
34
1 - Burner
2 - Tank
3 - Heater
4 - Safety/operation thermostat
5 - Switch of level
6 -
7 - Filter
8 - Load pumps
9 - Bathtub of recovery
1 - Burner
2 - Tank
3 - Heater
4 - Safety/operation thermostat
5 - Level switch
6 - Heating coil
7 - Filter
8 - Load pumps
9 - Ring pumps
10 - Regulator
11 - Heating cable