Starting The Software - Sony PCLK-MD1 Mode D'emploi

Starting the software

Use this procedure to start up this software.
Double click on the "MD Editor" icon.
This software is activated.
Registration of your name is only necessary the first time.
The following screen appears immediately after start up.
Setting up the serial port
Select "SerialSetup" from the option menu.
Select COM1, COM2, COM3, or COM4.
Notes
• When this software is started up, all playback or editing operations in
progress on the MD deck will be stopped.
• After this software has been started up, MD deck operation will not
be possible using the MD deck's controls or the remote's controls
except for the 1/u switch. If you attempt to operate the MD deck,
"REMOTE" appears in the MD deck's display. To use the MD deck's
controls or the remote's controls, first quit this software and then turn
the MD deck off and on.
• When this software is started up, the MD deck's PLAY MODE will be
automatically set to CONTINUE, and the repeat mode will be
canceled.
• When this software is started up, please do not turn the MD deck off.
11