HP DESKJET 3000 J310 Serie Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Installation troubleshooting
Windows:
If you are unable to print a test page:
• If your printer is connected directly to your computer
with a USB cable, make sure the cable connections
are secure.
• Make sure the printer is powered on.
The
[On button] will be lit green.
Make sure the printer is set as your default printing
device:
• Windows
7: From the Windows Start menu, click
®
Devices and Printers.
• Windows Vista
: On the Windows taskbar, click
®
Start, click Control Panel, and then click Printer.
• Windows XP
: On the Windows taskbar, click Start,
®
click Control Panel, and then click Printers and Faxes.
Make sure that your printer has a check mark in the
circle next to it. If your printer is not selected as the
default printer, right-click the printer icon and choose Set
as Default Printer from the menu.
If your printer is connected directly to your computer
with a USB cable and you are still unable to print, or the
Windows software installation fails:
1. Remove the CD from the computer's CD/DVD
drive, and then disconnect the USB cable from the
computer.
2. Restart the computer.
3. Insert the printer software CD in the computer's
CD/DVD drive, then follow the on-screen instructions
to install the printer software. Do not connect the USB
cable until you are told to do so.
4. After the installation finishes, restart the computer.
Windows XP, and Windows Vista are U.S. registered
trademarks of Microsoft Corporation. Windows 7 is
either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
Mac:
If you are unable to print a test page:
• If your printer is connected to your computer with
a USB cable, make sure the cable connections are
secure.
• Make sure the printer is powered on.
The
[On button] will be lit green.
If you are still unable to print, uninstall and reinstall the
software:
Note: The uninstaller removes all of the HP software
components that are specific to the device. The uninstaller
does not remove components that are shared by other
products or programs.
To uninstall the software:
1. Disconnect the HP product from your computer.
2. Open the Applications: Hewlett-Packard folder.
3. Double-click HP Uninstaller. Follow the on-screen
instructions.
To install the software:
1. Connect the USB cable.
2. Insert the HP software CD into your computer's
CD/DVD drive.
3. On the desktop, open the CD and then double-click
HP Installer.
4. Follow the on-screen and the printed setup
instructions that came with the HP product.
5

Publicité

Table des Matières
loading

Table des Matières