Sportplus SP-HT-9600-iE Mode D'emploi page 44

6. ASSEMBLY INSTRUCTIONS
STEP 4
1. Put the cover (12) on the saddle guide tube (13) and fasten using the screws (39) that
are premounted to the saddle guide tube.
2. Loosen the nuts (A) underneath the saddle (8). Then mount the saddle to the saddle
guide tube (13) and fasten using the nuts. See detailed image.
3. Insert the adjustable saddle support (7) through the lower saddle guide cover (38) into
the flywheel frame (1). Remove the protective cover before assembling the seat. See
detailed image. Set to the desired height and lock using the set screw (11). Fasten firmly.
4. You can adjust the height of the saddle support up or down by loosening the set
screw (11) and pulling out/pushing in the saddle support. The user could adjust the
saddle backward and frontward as well by adjusting the knob (36).
PLEASE NOTE: The correct saddle height is important to help you achieve the ideal biking
posture. When seated on the saddle (8), you should be able to reach the lower pedal with your
leg stretched.
WARNING – Risk of injury: The seat post set must be in the seat post tube up to the minimum
insertion depth. Observe the marking on the seat post.
SP-HT-9600-iE-IM-INT-V01.indb 44 SP-HT-9600-iE-IM-INT-V01.indb 44
8
39
12
13
11
7
38
1
44
7
A
5/21/2021 3:52:31 PM 5/21/2021 3:52:31 PM