Product Use
Securing Your Child
The parking brake MUST be engaged when the stroller is
stopped and when placing and removing child.
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child's neck.
1
- Push the top button on the buckle (1) to release the
buckle latch and remove the magnetic clips (2).
Place your child in the stroller.
2
- Insert the waist clips into the center buckle (1). Slide the
crotch belt adjustment buckle to adjust as needed (2).
3
- Open the harness covers to adjust the harness.
4
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten.
Shoulder Harness Position
5
- The upper shoulder harness buckles can be moved up
and down for added adjustment.
18
TRVL instructions
1
1
2
2
2
1
2
3
4
5
TRVL instructions
19