How to use the
Nuna buggy
Securing child
1 To release the buckle latch, push on center button and remove the clips.
2 To secure child, assemble buckle.
3 Fit harness snugly to child by sliding each adjustment buckle.
adjusting the shoulder harness position
1 In back of seat, turn adjustment buckle and push through the slot to
remove harness.
2 Reinsert harness into desired slots for comfortable fit.
3 For children less than 6 months, the shoulder straps shall run through
the lowest shoulder slots. For children older than 6 months,
the shoulder straps can run through the two upper shoulder slots.
adjusting the push handle
1 Unlock by pulling back levers on both sides.
2 Pull or push on handle to adjust to desired height.
3 Lock both levers by pushing forward.
(3, 4, 5)
(8)
(2)
(6)
(7)
(7)
13