Product Use; Securing Child - Nuna ivvi savi Mode D'emploi

Product Use

Securing child

1
- To release the buckle latch, push on center button and
remove the clips. (13)
2
- To secure child, assemble buckle. (14, 15, 16)
3
- Fit harness snugly to child by sliding each adjustment
buckle. (17)
Adjusting the shoulder harness position
Move the shoulder belt mount, the shoulder belt can be
adjusted up and down. (18)
To avoid serious injury from falling or sliding out,
always secure your child with harness.
Make sure your child is snugly secured. The space
between the child and the shoulder harness should
be about the thickness of one hand.
Do not cross the shoulder belts. This will cause
pressure on child's neck.
Switch Seat
1
- The seat can be switched to face front or to face the
parent.
2
- Squeeze the seat release buttons while lifting the seat
(19). Turn the seat to reverse direction, and then insert
the seat to seat mounts. (20)
12 IVVI savi pushchair Instructions
Adjust Recline
1
- There are 3 positions for the backrest.
2
- To raise the backrest, squeeze the adjustment button,
and push up. (21)
3
- To recline the backrest, squeeze the adjustment button,
and pull then adjust the backrest to a desired angle.(21)
Do not remove backrest tube.
Use Canopy
1
- To open the canopy, pull canopy toward front. (22)
Open the zippers on the canopy to use flap.That can
be convenient for baby resting. (22)-1
2
- To fold the canopy, pull canopy toward back. (22)
3
- To open the canopy window, roll fabric and secure with
magnet. (23)
Front Swivel Locks
1
- Push down the front swivel locks to lock front wheles
facing forward. (24)
2
- It is recommended to use swivel locks on uneven
surfaces.
Brake
1
- To lock wheels, step on brake lever and push
downwards. (25)
2
- To release wheels, step the brake lever forwards. (26)
3
- Always apply brake when pushchair is in stopped
position.
IVVI savi pushchair Instructions 13