SOUNDMASTER NR995 Mode D'emploi page 21

Turn on the system and set the volume to a low level. Press „MODE" button to enter
1.
into FM mode.
2. Connect the FM/DAB antenna onto the 75 ohm socket at the back of the unit, press the
"SCAN" button to start auto-search the FM stations. Or press "TUNER MENU+ /
TUNER MENU-" button to tune the desired radio station.
If you tune to a FM stereo station, the 'stereo' will show on the display. If you tune to a
3.
weaker FM station, the reception will automatically switch to mono.
You may press "ENTER" to change Stereo or Mono mode
During FM working mode, press "INFO" button to see the following information on the
4.
screen: Program Type / Program No. / AUDIO / TIME / DATE, etc.
During FM working mode, press "SCAN" button to scan all of the radio stations and will
5.
save the stations which is scanned successfully.
Press "PRESET" button one time, then press "TUNER MENU +" or
6.
"TUNER MENU -" button to choose the saved radio stations and confirm by ENTER
button.
For example, choose 'Preset Recall <9:(89:50MHz)' , then press "ENTER" button to
confirm to listen to the radio station '89:50MHz'.
7) When you finished listening, turn off the unit by using the " / MODE" button.
FM Auto search settings:
During FM working mode, press "MENU" button to set 'Scan setting'. Press "ENTER" button one
time and the 'Scan setting All stations' will show on the display, press the "TUNNER MENU +"
or "TUNER MENU –" to choose 'Scan setting strong stations only', press "ENTER" button one
time to confirm.
When 'Strong stations only' shown on the display, the FM search is stopping only on strong
stations.
1. Turn the system 'on' and set the volume to a low level. Press "MODE" button to enter
into DAB mode.
2. Connect the FM / DAB antenna onto the magnetic plate at the back of the unit, the
player will scan the DAB station automatically till receive the DAB station.
3. Press the "TUNER MENU -" or "TUNER MENU +" button to choose the DAB stations
manually. Choose the desired DAB station and press "ENTER" to confirm to play. If you
tune to a DAB stereo station, the 'stereo' will show on the screen.
4. During DAB playing mode, press "INFO" button to see the information of the playing
DAB station on the screen, i.e. Program Type / Program No. / Frequency Range /
Signal Strength / Time / Date etc.
RADIO OPERATION
DAB OPERATION
5
NR995 / English Instruction Manual