MINN KOTA TALON TRAVEL COVER 8 FT Mode D'emploi

THANK YOU
When you fish with us, you fish with an edge. With a passion. With experience. You're fishing with a Minn Kota.
It was born in Mankato, Minnesota. It was built by people who love this sport and want you to do more of it. It's
got our reputation behind it and years of good fishing ahead of it. Thank you for fishing with us.
Item /
Part # Description
Assembly
2376487 COVER-TRAVEL, 8' TALON BT
2 2376488 COVER-TRAVEL, 10'/12' TALON BT
2376489 COVER-TRAVEL, 15' TALON BT
INSTALLATION
1
ITEM(S) NEEDED
a. Take the Travel Cover (Item #2) and unzip and
disconnect the zipper. Unsnap all of the snaps.
Take a look at the Talon from the back or Stern
of the boat looking Inboard. Notice the Motor
Housing protruding further from the Talon on
the Starboard side of the boat.
b. Set the Talon Travel Cover on the top of the
Talon with the Talon logo facing Outboard so
that the pocket for the Motor Housing fits the
larger housing on the Starboard side. The top
mold of the Travel Cover should rest firmly in
place on the top of the Talon.
c. Pull the cover around the Inboard facing portion
on the Talon and secure the snaps alternately
on each side of the Talon. Work from the Motor
Housing to the top of the Talon by pressing them
together firmly. The Travel Cover should have the
Minn Kota logo facing Inboard.
d. Once all snaps are secure, make sure the Power
Cord sits inside the track along the side of the
Talon on the Starboard side. Along the Port
side, at the bottom of the Talon just above the
Mounting Bracket, attach each half of the zipper
together. Pull up until the zipper is secured just
below the Motor Housing.
RECOMMENDED ACCESSORIES
Talon Wireless Foot Switch
Gives you hands-free control of
your Talons, including control
of Anchoring Modes.
Installation Brackets
Our extruded aluminum brackets are
built with a reinforced construction
so they can hold Talon securely to
your boat – no matter what. Our
brackets are designed to fit almost
any transom orientation and outboard
style, and can be adjusted and tweaked
on two pivot points to the perfect orientation.
Part #2374900
TALON TRAVEL COVER
8 FT, 10/12FT & 15 FT
1810247, 1810248 & 1810249
Qty.
1
1
1
1a
Motor Motor
Housing Housing
#2 x 1
Starboard Starboard
1c
Top Mold Top Mold
Minn Kota Minn Kota
Logo Logo
Motor Motor
Housing Housing
Port View Port View
1d
Mounting Mounting
Bracket Bracket
Talon Stomp Switch
These individually mountable,
large target controls allow for
automatic up/down control of
Talon from the bow of your boat.
Quick Disconnect Cable
This heavy-duty, waterproof connector features
an all-inclusive screw-lock design.
Talon Mobile App
Control all the functions
of your Talon plus
software updates.
ECN 41694
1b
Port View Port View
1c
Snap Snap
Snap Snap
Snap Snap
Snap Snap
Starboard View Starboard View
1d
Zipper Zipper
Port View Port View
Port View Port View
Rev B
2
Top Mold Top Mold
Outboard Outboard
Minn Kota Logo Minn Kota Logo
Motor Motor
Housing Housing
Zipper Zipper
06/21