Eden Royal Well Burford 86 Manuel D'instructions page 66

Section 4
This section shows you how to assemble the sides to the gables of your
greenhouse (right).
These tips and hints are to ease the assembly from this section right up
to the completion of you greenhouse.
3/6
9
The (I) tip on sections 2
and 3 now comes into
(A)
play. Upon connecting
the sides to the gables,
all that is needed to
3/6
attach the side base (3,
6) (as shown left) is to
loosen off the bolt and
nut (50, 51) shown by
(A), let it slide down into
position then tighten up.
Use the (I) tip on sections 2 and 3 when
(B)
assembling the sides to the gables at eaves
level. As shown left (B) loosen the nut and
bolt (51, 50), let it slide down then tighten
As shown left (C), remove the nut from the
bolt (51, 50) to attach the diagonal brace,
2
then place nut back on the bolt loosely with
brace now secured. Then place into the slot
on underside of gutter then tighten nut.
(C)
As shown right (D), from the outside, the end
of the gutter (2) should be flush with the
Eden Greenhouses Customer Helpline +44 (0)1242 676625
4
back up.
gusset plate (9).
Hints and Tips Handbook
(D)
2
9
5