Eden Royal Well Burford 86 Manuel D'instructions page 65

Hints and Tips Handbook
Section 3
This section shows you how to assemble the sides of your greenhouse.
TM
The Eden Zero threshold range has only one size of bay when it comes to the
sides (illustrated by arrows, right and below) to make the assembly easy and to
minimise adjustments needed when it comes to glazing.
The table below will show the measurements needed for the bays.
(Measurements are taken from the centre of the bolt channel to the next.)
Model
Birdlip
Burford
Blockley
Bourton
3
4
618mm
All
All
All
All
This tip is to make the
assembly simple when it comes
to section 5 ROOF.
When constructing the sides,
an extra square headed bolt
(50) and nut (51) are required
in the side glazing bars (1) as
shown in (A).
This is to allow for the eaves
brace (40) when assembling
Eden Greenhouses Customer Helpline +44 (0)1242 676625
3
(A)
the roof.
2
1
50, 51