Table des Matières
Publicité
Technical Information
1 - Vent
Figure 78 Vent. This is the specific connector to control the optional vent valve.
2 - External Fan
Figure 79 External Fan. This is the specific connector to control the optional cooling fan.
3 - IN/OUT and Power Supply
Figure 80 IN/OUT and Power Supply. This is the specific connector which collects the input
and output signals, plus the two supply voltage input pins.
The connectors layout shown by the pictures 78, 79, 80 is related to one that is
available when the control unit is fitted with the fan/vent adapter kits X3514-68001;
with this adapter installed on the controller, a couple of specific connectors are
directly available to connect the air cooling and the vent kit; in this case, the signals
available on the DB15 connector of the fan/vent adapter kit X3514-68001 are the
ones shown by the following table:
Agilent TwisTorr 305-IC User Manual
243
Publicité
Table des Matières
