Table des Matières
Publicité
Technical Information
Compliance with:
Power cable
USB communication
When the TwisTorr 305-IC has been stored at a temperature less than 5°C, wait
NOTE
until the system has reached the above mentioned temperature before switch the
TwisTorr 305-IC on.
Figure 44 Maximum allowed relative humidity as a function of the air temperature for each
Agilent TwisTorr 305-IC User Manual
**
cooling-water temperature
EN 61010-1
EN 61326-1
EN 1012-2
EN 12100
EN 50581
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive
2014/30/EU
Directive 2011/65/EU
The admitted power supply voltage value
(measured at the electronics' input connector) is
24V +/- 10%.
Please size the supply cables in order to always
ensure that the minimum voltage value at the input
connector is respected. For instance: the maximum
length that is allowed for a typical AWG20 cable is
equal to 3m. (Typ. resistance value for AWG20
cable: 33,3mOhm/m; in case of a single pole wire
with a length equal to 6m and with the maximum
current supplied to the controller (7.5A), the voltage
drop on the cable will be equal to 1.5V).
as per USB 1.0
211
Publicité
Table des Matières
