Battery Replacement - Simons Voss Technologies Padlock AX Guide Abrégé

5. Battery replacement

5 Battery replacement
Maintaining the condition during battery replacement
The Digital Cylinder AX cannot engage or disengage without power sup-
ply. Therefore, while the batteries are removed, the Digital Cylinder AX
retains its current locking status and its data status (programming and
stored logs).
26 / 124
3. ML version only: Turn the knob fully counter-clock-
wise.
Shackle locked.
9
4. Check for correct closure.
Padlock locked.
9
NOTE
Battery contact malfunction due to grease film
When touching batteries, leave a thin film of skin
grease on the batteries. This film deteriorates the con-
tact between the electronics and the batteries.
1. Do not touch the contacts of the new batteries
with your hands.
2. Use clean and grease-free gloves.
ü Special tool available.
Padlock AX
EN