Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Page 5 of 9
PICTURE 11
PICTURE 13
PICTURE 15
FITTING INSTRUCTIONS
•
Remove the panniers, rider and pillion seats.
•
Remove the two bolts arrowed in picture 1.
•
Remove the two bolts arrowed in pictures 2 and 3, the remove both pannier mounting
brackets.
•
Remove the four bolts arrowed in pictures 4 and 5.
•
Carefully remove the rear sub-frame cowl.
•
Disconnect the three wiring plug sockets arrowed in picture 6.
•
Remove the four bolts arrowed in picture 7.
•
Remove the two bolts arrowed in picture 8.
•
Gently unclip the plastic under-tray from the location tabs shown in pictures 9 and 10 and
gently lower the under-tray (you will have to feed the tool kit bungee through the slot in the
rear sub-frame) until it rests on the rear wheel.
•
With the under-tray lowered remove the two screws arrowed in picture 11.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
R&G
www.rg-racing.com
PICTURE 12
PICTURE 14
PICTURE 16
Email:
info@rg-racing.com
RAP0011
Publicité
Table des Matières
