How To Use; Scheduled Cleaning - Dreame D9 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21

How to Use

EN
1. Turn On/Off
Press and hold the button
for 3 seconds to turn on the robot. Once the power
indicator turns solid white, the robot is in standby mode. To turn off the robot,
press and hold the button
for 3 seconds while the robot is stationary. Turning
off the robot will end the current cleaning task.
2. Start Cleaning
Press the button
briefly to turn on the robot. Upon activation, the robot will
accurately map out routes, and then methodically clean each room in a way
that it firstly cleans along edges and walls and then cleans floors in an S-shape
pattern to ensure a thorough job.
Note: If the battery is too low, the robot will automatically return to the dock to charge. It
will resume unfinished cleaning tasks after charging to the appropriate power.
(Resume Cleaning mode need to open in advance on the APP.)
10
3. Cleaning Mode
Four cleaning modes are available in the Mi Home/Xiaomi Home app: Quiet,
Standard, Strong and Turbo. The default mode is Standard.
4.Pausing/Sleep Mode
Pausing: Press any button to pause the robot during cleaning.
Sleep Mode: The robot will automatically enter sleep mode after 10 minutes of
inactivity, then the power and charging indicators will go off. To wake up the
robot, press any button.
Note:
The robot will turn off automatically in the sleep mode more than 12 hours.
When the robot is paused, placing it onto the charging dock will end the current cleaning
task.
5. Do Not Disturb Mode
Do Not Disturb mode prevents the robot from automatically starting cleaning
tasks, and the power indicator remains off. You can enable Do Not Disturb or
modify its hours in the app.(The mode is opened by default from 22:00 to
08:00.)
Note:
Scheduled cleanups will still be carried out during the DND period.
The robot will continue cleaning after this period ends.
How to Use
6. Spot Clean mode
When the robot is in standby mode or paused, press and hold the button
3 seconds to start Spot Clean mode. In this mode, it will clean a square-shaped
area of 1.5 ×1.5 meters directly around the robot. When the spot cleaning is
done, the robot will automatically return to its original location and shut off.
1.5 meter
1.5 meter
Note: Activating Spot Clean mode will end the current cleaning task of the robot.

7. Scheduled Cleaning

for
You can schedule cleaning time in the Mi Home/Xiaomi Home app. The robot
will automatically start cleaning at the designated time and then return to the
charging dock to recharge when the cleaning is done.
8. More APP Functions
Follow the instructions on the APP interface to use more functions. The version
of the app might have been updated, and please follow the instructions based
on the current app version.
EN
11

Publicité

Table des Matières
loading

Table des Matières