Routine Maintenance - Dreame D9 Manuel D'utilisation

How to Use
EN
9. Use the Mopping Function
It is recommended that all floors are vacuumed at least three times before the
first mopping session to achieve better cleaning effect.
1)Dampen the mop pad and wring out excess water. Slide the pad all the way
into the slot of the water tank until it is securely in place.
2)Open the water tank lid, fill the tank with water, then securely close the lid.
Note: Do not use non-designated detergents or disinfectants.
12
3)Align the mopping module as indicated by the arrow, then slide it into the
back of the robot until it clicks into place. Press the button or use Mi Home/
Xiaomi Home app to start cleaning.
Click
Click
Note:
•
It is not recommended to use the mopping function on the carpets.
•
Use the app to adjust the water flow as required.
4)Press the two side clips inwards and slide the water tank backwards to
separate it from the robot.
Note: When the robot is charging or not in use, remove the mopping module, pour out all
remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors.

Routine Maintenance

Clean the Dust Bin and Filter
1. Open the robot cover, then press the dust bin clip to remove the dust bin.
2. Open the dust bin cover as indicated by the diagram.
3. Remove the filter and tap it basket gently.
Note: Do not attempt to clean the filter with a brush or finger.
4. Rinse the dust bin and filter with water until it is clean. Thoroughly
dry the filter before re-installing.
Note:
•
Only clean water should be used to clean the filter. Do not use detergent.
•
Keep it in a well-ventilated or cool plac.
EN
13