NORMBAU Cavere Care Instructions De Montage Et D'utilisation page 9

Montagehinweise / Mounting information / Consigne de montage / Montagetip
Cavere Chrome Care
Abrasive sponges and scouring agents should not be used to clean our Cavere
Chrome products. We also advise against the use of cleaners containing solvent
or acid, limescale removers, vinegar and cleaning agents containing acetic acid.
The chrome surface can be cleaned using a little soap on a damp cloth. Limescale
stains can be avoided by drying the tap after every use. If limescale deposits still
build up, you can remove these using an environmentally friendly cleaning agent.
The appropriate cleaning agent should only be left on for a short time before being
rinsed thoroughly with water. In areas with hard water, it may be necessary to
clean the chrome surface at specific intervals. Please observe the following points
when cleaning:
 Residues from toiletries such as shampoo, shower gel or liquid soap should
be removed quickly as these can leave permanent stains.
 Harsh cleaning methods and aggressive cleaning agents can damage
surfaces and even penetrate the inside of the products.
Do not apply spray cleaners directly to the chrome surface. Spray the

cleaning agent onto a soft cloth and use this to wipe the surface instead.
 Use clean water to rinse the chrome surface thoroughly after cleaning.
Do not use any cleaning agents that contain hydrochloric acids, formic acids,

chlorine bleaching or acetic acids, as these can cause considerable damage.
Be sure to treat limescale stains and other types of soiling correctly. Any

damage caused as a result of improper treatment shall not be covered under
warranty.
Disposal
Disposal of the product and packaging is subject to the relevant national
regulations and must be disposed of in the prescribed manner.
2022-10-26 / 8214 415 / C |
9 von 24 NORMBAU