Technical Specifications - Rocal BORN Manuel Des Caracteristiques, Installation Et Fonctionnement

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
1. SPECIFICATIONS

1.1 Technical specifications

Parameter
Minimum - Maximum draught
Fuel consumption
Smoke mass flow rate
Performance
Nominal output
Power range
Average CO concentration at 13% of O
NOx concentration at 13% of O
OGC concentration at 13% of O
Particle concentration at 13% of O
Medium draft (trial)
Net weight
Maximum authorized load (fuel)
Reload height
Logs length
Minimum flue height
Ø Flue duct
Ø Air inlet
Front safety distance
Side safety distance
Back safety distance
Base safety distance
Average temperature of smoke
Type of combustion
Flue liner
Fuel
Humidity fuel logs
Certification year
Certificate No.:
1.2 Breakdown of delivery components
(
Make sure you have all the components described below in relation to the picture on section II of the ANNEXED document)
1. Fireplace's body.
2. Fireplace's foot.
3. Direct flue pipe.
4. Ceiling crest.
5. Upper baffle to limit the draught. cover and
6. 3x metal anchors.
7. Cleaning cloth.
8. Aluminium ring to connect, exterior air inlet.
9. 4x washers to install external air inlet.
10. 4x screws to install external air inlet.
11. Metal clamp.
12. Heat-resistant spray paint for touch-ups.
13. Heat-resistant glove.
14. 4x anchors to install ceiling crest.
15. 4x screws to install ceiling crest.
16. Ceramic adhesive rope.
17. Tool for handling registers.
18. Documentation bag: output declaration, energy label, guarantee, technical sheet, and installation and operating
characteristics manual.
1.3 Diagram of the equipment's measurements
See the ANNEXED document, section I
2. REQUIREMENTS PRIOR TO INSTALLATION
ALL LOCAL STANDARDS, INCLUDING NATIONAL AND EUROPEAN REGULATIONS MUST BE COMPLIED WITH UPON
INSTALLATION OF THE EQUIPMENT.
THE INSTALLATION MUST BE PERFORMED BY A PROFESSIONAL. FAILURE TO COMPLY WITH THIS CLAUSE SHALL
EXONERATE THE MANUFACTURER FROM ANY RESPONSIBILITY.
2
2
2
2
Born
11-13 Pa
3,48 kg/h
13,8 g/s
81,1 %
12,4 kW
8,5 – 15 kW
0,107 %
132 mg/Nm
3
76 mg/Nm
3
29 mg/Nm
3
12 Pa
156 kg
4 kg
200 mm
330 mm
4000 mm
180 mm
100 mm
1000 mm
1000 mm
1000 mm
11-13 Pa
3,48 kg/h
INTERMITTENT
NOT SHARED
NATURAL WOOD
12-20% - two years under cover
2021
1880-CPR-070-21
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X1315v2

Table des Matières