Configuration Menu - Bodet Cristalys Date Instructions De Mise En Service Et D'utilisation

Alternating display between 2 functions on the second line
language selected.
Select and validate the option (otherwise, select "- -").
Select and validate the following option alternating display "Alt".
Display of the bottom line :

Configuration menu

1. To go to Configuration mode, press the [SEL] button and while holding it down press [+] for
more than 3 seconds.
2. The 12/24 menu is displayed. Press [+] to choose between "12h" mode
(display of AM/PM from 1 hr to 12 hrs) or "24 h" mode (display from 0,00
to 23.00 hrs). Press [SEL] to validate.
32
To alternate the display between 2 functions, go to
point "4" (page 33).
A single alternating mode is possible, this is why you
cannot display alternating information in 2 languages. But
the alternating display of functions is compatible with the
options (date "DT", event "EV" or world "WO") for the
Digital display of the date.
Go into the configuration menu, point "4" (page 33).
Select and validate the first language, then select and validate the option
"DT".
Countdown to an event.
Go into the configuration menu, point "4" (page 33).
Select and validate the first language, then select and validate the option
"EV".
Select the date of this event (year, month, day).
Then select the display mode for this event.
Either fixed validating by FIX or alternated with the date validating by ALT or
alternated with a programmed message validating by ALT PRG.
N.B. when the countdown is finished, the clock returns to displaying the date.
World Clock.
To display the name of a city as a fixture, go into the configuration menu,
point "4" (page 33).
Select and validate the first language, then select and validate the option "WO".
Select and validate the city.
Then select the display mode fixed or alternated with the date.