Installation - Bodet Cristalys Date Instructions De Mise En Service Et D'utilisation

3.4 Installation

Setting of the table bracket (if supplied)
(in the 2 notches of the wall bracket).
■ Select the location where your clock is to be installed, ensuring for the model with radio
synchronisation that radio reception is correct. The radio receiver clock should be installed in a
place that is free from electrical interference (cathode tube, transformers, etc). Avoid fixing the
clock directly to a metal or reinforced concrete partition or wall.
■ Fit the wall bracket using the plugs and screws supplied.
■ Clip the clock in place on the bracket and secure with the anti-theft locking screw provided (see
Diag.2).
■ Remove the protective sheet from the front panel and use the anti-static cloth to clean the clock.
Mounting on vertical bracket or ceiling bracket :
■ Cristalys clocks can be installed on various types of brackets (ref. 938901, 938907 and
938908). See the installation manual delivered with the bracket.
28
161
100
Diag.: 2
Anti-theft locking
screw