Gas Supply; Pressure Regulator - Forno Alta Qualita FFSGS6211-30S Guide D'installation

before installing the appliance. Provide appropriate ground for the appliance. Use copper conductors only. Failure
to follow these instructions could result in serious injury or death.
Grounding
The power cord is equipped with a three-prong(grounding) plug which mates with a standard three-prong
grounding wall receptacle to minimize the possibility of electrical shock hazard from the range.
All cord connected appliance shall include instructions relative to location of the wall receptacle and a warning to
the user to disconnect the electrical supply before serving the appliance.
Where a standard two-prong wall receptacle is encountered, it is the responsibility and obligation of the customer
to have it replaced with a properly grounded three-prong wall receptacle. Do not cut or remove the grounding
prong from the power cord.
Electric Power Supply Requirements

Gas Supply

Installation must comply with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI
Z223.1 / NFPA 54. In Canada, installation must conform to the current natural Gas Installation /code, CAN
1-1.1-M81 and with local codes where applicable.
This range has been design-certified Conforms to CSA/ANSI STD Z21.1-2018 Certified to CSA STD 1.1-2018
Household Cooking Gas Appliances
TYPE OF GAS:
NATURAL GAS
Supply Pressure
Minimum Supply Pressure
Max Regulator Pressure
LP GAS
Supply Pressure
Minimum Supply Pressure
Max Regulator Pressure
WARNING
Ventilation: it is recommended that the unit be operated with an oven head, vented exhaust hood of sufficient size
and capacity.

Pressure regulator

Do not obstruct the flow of combustion air into the range and ventilation air
away from the range
WC
5" (12.5 mb)
6"
14" (34.9 mb), 0.5 psi (3.5 kPa)
WC
10" (25 mb)
11"
14" (34.9 mb), 0.5 psi (3.5 kPa)