Installing The Legs - Forno Alta Qualita FFSGS6211-30S Guide D'installation

TOOLS NEEDED FOR INSTALLATION (not supplied with the range)
Tape measure
Screwdriver Wrench Socket wrench Allen key
&Pencil
Protective Adjustable
Hammer Drill
gloves wrench
Adjustable pliers

Installing The Legs

The ranges must be used only with the legs properly installed. Four height-adjustable legs are shipped with the
range situated in the oven cavity. Before installing the legs, position the appliance near its final location as the legs
are not suitable for moving the appliance over long distances.
After unpacking the range, raise it enough to insert the legs in the appropriate receptacles situated on the lower
part of the appliance.
Lower the range gently to keep any undue strain from legs and mounting hardware. If possible, use a pallet or lift
jack instead of tilting the unit.
Adjust leg height to the desired level by twisting the inside portion of the leg assembly until the proper height is
reached. Check with a level that the cooktop is perfectly level.