CAME BY-3500T Manuel D'installation page 37

Masquer les pouces Voir aussi pour BY-3500T:

Table des Matières

Les langues disponibles

CONNECTING TWO COUPLED GEARMOTORS HAVING A SINGLE CONTROL

With two coupled gearmotors, you can command only the opening (by button and/or radio control): the gate will close only in automatic closing mode.

Coordinate the direction of travel of the two gearmotors and , by modifying the motor's rotation (invert the cables on terminals FA-FC and U-V).

Make the electrical connections only on the motor's control board . Whereas, the adjustments and features, must be made on both boards.

Connect the two boards together, as illustrated. Set DIP 1 and 3 to ON on both boards.

Fit the AF board only into the gearmotor's board .

The transmitter button for opening a gate must be memorized on the gearmotor's channel CH1 . The transmitter button for opening both gates must be

memorized on the gearmotor's channel CH2 .

CAME

Table des Matières