Removing And Reinstalling The Software - Lexmark P350 Mise En Route

Ink level
Message
Your Color Cartridge will need to be replaced soon. 25% full
Your Color Cartridge will need to be replaced soon. 15% full
Your Color Cartridge will need to be replaced very
soon.
Note: These messages and percentages may not apply to the starter cartridge that shipped
with your printer.
1
Install a new print cartridge if necessary.
To order supplies, see "Ordering supplies" in the "Maintaining the printer" chapter of the
User's Guide on the CD.
2
Press to continue.
Paper Jam
See "Jams and misfeeds troubleshooting" on page 48.
Paper Out
1
Load photo paper, with the glossy or printable side facing you. (If you are not sure which
side is the printable side, see the instructions that came with the paper.) For more
information, see "Loading paper" on page 20.
2
Press .
PictBridge Error
Solution 1
Make sure your PictBridge-enabled digital camera is properly connected to the printer. For
more information, see "Connecting a PictBridge-enabled digital camera" on page 24.
Solution 2
The camera you connected is not in PictBridge mode. For more information, see the camera
documentation.

Removing and reinstalling the software

If the printer is not functioning properly, or if a communications error message appears when
you try to use the printer, you may need to remove and reinstall the printer software.
1
Click Start Programs or All Programs
2
Select Uninstall.
3
Follow the instructions on the computer screen to remove the printer software.
Lexmark 350 Series.
51
Ink level
5% full