Connecting A Pictbridge-Enabled Digital Camera - Lexmark P350 Mise En Route

Connecting a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from
your digital camera without using a computer. You can connect a PictBridge-enabled digital
camera to the printer, and use either the printer or the camera to control printing photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For
more information, see the camera documentation.
•
The printer reads only one media device at a time.
3
If the PictBridge connection is successful, the following appears on the display: Camera
connected. Refer to Camera display or Camera User Manual for
further information. If you want to use the camera to control printing photos, refer
to the instructions in the camera documentation.
4
If no selections were specified on your digital camera beforehand, you can use the printer
to control printing photos. Press
panel display. For more information, see "Using the PictBridge menu" on page 18.
to make the PictBridge menu appear on the control
24