Lexmark P350 Mise En Route page 42

3
Insert a USB Bluetooth adapter into the PictBridge port on the front of the printer.
Note: Bluetooth adapter sold separately.
4
Once the printer detects the Bluetooth adapter, the following message appears on the
printer display for five seconds: Bluetooth Dongle Connected.
5
To print photos from your Bluetooth-enabled device, see the documentation that came
with the product.
Note: To prevent smudging or scratching, avoid touching the printed surface with your
fingers or sharp objects. For best results, remove each printed sheet individually from the
paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying,
or storing.
42