Troubleshooting; Setup Troubleshooting - Lexmark P350 Mise En Route

Troubleshooting

•
"Setup troubleshooting" on page 43
•
"Print troubleshooting" on page 45
•
"Jams and misfeeds troubleshooting" on page 48
•
"Device troubleshooting" on page 48
•
"Error messages troubleshooting" on page 49
•
"Removing and reinstalling the software" on page 51

Setup troubleshooting

Incorrect language appears on the display
1
Press to turn the printer off.
2
Press to turn the printer back on.
3
Press .
4
Press .
5
Press to continue.
6
Press or repeatedly until the language you want appears on the display.
7
Press to save your selection.
Power button is not lit
Make sure you have disconnected the power supply cord from the printer and then from the
wall outlet.
1
Plug the cord all the way into the power supply port on the printer.
2
Plug the cord into an electrical outlet that other electrical devices have been using.
43